Description: PTFE Filament Packing made from synthetic composite PTFE yarn, the yarn is sintered, highly stretched. The packing is then re-impregnated with mix of PTFE emulsion during braiding operation. Good resistance to compression and to extrusion, high structural and cross-sectional density.
PTFE FDA Filament Packing
HV103R PTFE Filament packing with Silicone Core High red elastic silicone rubber core can absorb vibration to control leakage.
Typical Application > Universal packing suitable for valves, pumps and agitators in most mediums
> Especially suited for high pressure valves, plunger pumps, agitators, mixer etc. And where contamination is not permitted..
Prime Features > Clean, non-contaminating and graphite free
> Long maintenance free service life
> Minimal shaft wear and leakage
> Superior performance
> Lower frictional factor
Technical Data
| Material | 100% Filament PTFE yarn (with Silicone oil, Silicone core) | |
| Temperature Range | -150 up to +260 oC | |
| Process | Rotating | 20 bar |
| Reciprocating | 150 bar | |
| Static | 250 bar | |
| Shaft Speed | 10m/s | |
| PH | 0~14 | |
| Density | 1.75g/cm3 |