Description:
PTFE Filament Packing made from synthetic composite PTFE yarn, the yarn is sintered, highly stretched. The packing is then re-impregnated with mix of PTFE emulsion during braiding operation. Good resistance to compression and to extrusion, high structural and cross-sectional density.
HV103R PTFE Filament packing with Silicone Core
High red elastic silicone rubber core can absorb vibration to control leakage.
Typical Application
> Universal packing suitable for valves, pumps and agitators in most mediums
> Especially suited for high pressure valves, plunger pumps, agitators, mixer etc. And where contamination is not permitted..
Prime Features
> Clean, non-contaminating and graphite free
> Long maintenance free service life
> Minimal shaft wear and leakage
> Superior performance
> Lower frictional factor
Technical Data
Material |
100% Filament PTFE yarn (with Silicone oil, Silicone core) |
Temperature Range |
-150 up to +260 oC |
Process |
Rotating |
20 bar |
Reciprocating |
150 bar |
Static |
250 bar |
Shaft Speed |
10m/s |
PH |
0~14 |
Density |
1.75g/cm3 |