Direct Operated Selonoid Valve

Description

• Fluids: Valves are suitable for water, low viscosity oils etc… non-aggressive liquids and Air, Inert Gas etc… gaseous but is not suitable for hazardous fluids
• Switching Function: Normally Closed (N.C, Closed when de-energised) (ESV 100 Series) and Normally Open (N.O, Open when de-energised) (ESV 101 Series)
• Principle of Operation: Direct Operated
• Way Number: 2/2 (Ports / Positions)
• Connection and Port Sizes: G1/8” and G1/4”
• Connection Type: Thread (Female), G (BSPP / ISO 228-1)
• Pressure Range: 0 -16 Bar (ESV 100 Series) , 0-12 Bar (ESV 101 Series)
• Fluid Temperature: -100C to max. 800C , Ambient Temperature: -200C to max. 700C
• Opening Time: 25 ms , Closing Time: 25 ms
• Max Viscosity: 38 cSt or mm2/s
• Maximum Allowable Pressure or Design Pressure: 24 bar (ESV 100 Series), 18 Bar (ESV 101 Series)

​​

Features

• Don’t require differential pressure, internal exhaust system (for ESV 101 Series)
• Compact design
• Valve has sealing o-rings,
• Suitable AC and DC voltage, high voltage tolerance
• Coil interchangeable without dismantling the valve (don’t matter AC or DC)
• Low flow loss, low power loss
• Various flow rate options, wide range of pressure ratings, wide range of orifice options
• Mounting position, optional any position but preferably solenoid coil vertical on top
• The fluid passing through the valve must be filtered
• Flow rate (Q) can be usually calculated as a function of pressure, density and flow coefficient
• According 97/23/EC Pressure Equipment Directive (PED), 2006/95/EEC Low Voltage Directive (LVD) and 2004/108/EC Electromagnetic Compatibility Directive (EMC).

Range of Applications

• Cooling Applications
• Gas Boilers
• Water Treatment Systems
• Garden Irrigation Systems
• Central Heating Systems
• Air Working Textile Machines

Options

• Custom options can be performed for customer’s special requests
• On request; NPT (ANSI 1.20.3), R (BSPT / ISO 7-1), W (BSW / Whit- worth), M (Metric) etc…
• On request; diaphragm or sealing or o-rings can be FPM (VITON) (-100C to 1600C ), EPDM (-100C to 1400C)
• On request; various body surface coating, nickel plated body, differ- ent body materials, internal parts stainless steel (for ESV 101), manual override, seat can be stainless steel, filter, other pipe connections, 2  mounting sub-base holes at the bottom of the body
• On request; other special supply voltages, frequencies (60 Hz), other power, coil insulation class : F (1550C), coil duty latching model
• On request; with electronic timer, Explosion-Proof coil for use in zones 1/21-2/22 (Eex em II T4/T5), coil encapsulation material can be fiber glass reinforced (V0 or V1)
• On request; connector with LED or without connector, connector with visual indication and peak voltage suppression, connector with cable length of 2m, Spade plug (Cable Ø 8-10 mm), connector  non-flammable
• On request other versions

Electrical Characteristic

• Protection Degree: IP 65 (EN 60529) ( with connector )
• Plug Connection: DIN 46340-3 poles connectors (DIN 43650)
• Connector Specification: ISO 4400 / EN 175301-803 , Form A, Spade plug (Cable Ø 6-8 mm)
• Electrical Safety: IEC 335, EN 60335-1, EN 60204-1
• Coil Insulation Class: H (1800C)
• Coil Impregnation: Polyester Fiber-Resin Glass
• Coil Encapsulation Material: Fiber Glass Reinforced (V2)
• Supply Voltages: For AC(~) 12V , 24V , 48V , 110V , 230V

For DC (=) 12V , 24V , 48V , 110 V, 230 V

• Voltage Tolerances: For AC (~) or DC (=) %-10 ; %+10
• Frequency: 50 Hz
• Coil Duty Cycle: %100 ED, Continously Rated
• Design according to DIN VDE 0580