ATLAS HBM Progressive Cavity
ADH Series centrifugal pumps with mechanical seals are made of plastic materials (Polypropylene and PVDF) and are suitable for highly corrosive liquids. They are driven by direct drive motors (up to 3000 rpm). Their special open impeller design allows pumping even in the presence of very dirty liquids with viscosities up to 500 cps (at 20 °C) and small suspended solids. There are two versions available with different internal mechanical seals depending on the intended use, A (lip seal) and B (bellows seal).
Centrifugal pump_used for chemicals model: ADH of Alphadynamic Company_ made in Europe by Hai Viet Technical Service Co., Ltd. genuine distribution in Vietnam for high performance and reliability in all conditions work.
Technical characteristics:
※ Maximum Capacity 75 m3/h
※ Maximum Pressure 12 Bar
※ Maximum Temperature 100 °C
※ Maximum Viscosity 500.000 cPs
※ Pump Body: Cast iron GG25
※ Available Rotors: Tool Steel AISI D6 HCP, Stainless steel 316
※ Available Stators: NBR, EPDM, VITO, HYPALON
※ Seal: Mechanical seal SIC/SIC/
※ Ports: Flange PN16
Prioritized
※ Length Geometry
※ Lower Sliding Velocity
※ Higher Performance compared to classic geometry
※ Minor service requirements
※ Stability in pressure & flow due to longer sealing lines
※ Improved flow characteristics
※ Reduced Vibration, Turbulence, shear rates & pulsation
※ Smooth and performance
※ Improved volumetric, Mechanical & overall efficiency
※ Block construction minimizes overall dimensions, providing a shorter pump length.
※ Eliminates the need for coupling and cover protection.
Application
They are used for the transfer of:
※ Raw, primary, secondary sludges
※ Thickened sludges
※ Sludges before the filter press
Other industrial applications are:
※Paper industry like starch, glue
※Building industry like colourings, cement, mortar, bentonite
※Ship building industry like waste oil, oily bilge water
※Ceramic industry as clayey sludges, lime, glaze
※Mining industry
※Petrochemistry
※Agriculture
※Refinery
CÔNG TY TNHH DỊCH VỤ KỸ THUẬT HẢI VIỆT
⛳️: No. 119, TA16 Street, Thoi An Ward, District 12, HCMC.
Call / Zalo: 0903.681.182 - Mr. Vu
Email: vu.pham@haivietcorp.com
Hotline: 0903.144.189